DAOKI 2Pack USBASP USBISP Programmer Downloader ATMEGA8 ATMEGA128 ATtiny/CAN/PWM with 2PCS Flat Ribbon Cable 10Pin, 2PCS…

Feature:
1.Onboard ATMega8 chip.
2.Two indicator lights -Power supply and Programming
3.Onboard 500mA overcurrent protection self-recovery fuse
4.Support 5V and 3.3V power supply
5.Programming interface is reserved, the user can upgrade the downloader firmware by themself.
6.Support AT89S51 / 52 microcontroller
7.Support many AVR ASP chips
8.The output port is ATMEL standard port
9.AUTOSPEED automatic speed control firmware

Note:
1.The ISP interface converter can be used for Arduino development board.
2.AVR MCU development board can be used to download interface converter.
3.The AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface ConverteR

Supported microcontrollers include:
Mega Series:
ATmega8 ATmega48 ATmega88 ATmega168 ATmega328
ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16
ATmega161 ATmega162 ATmega163 ATmega164 ATmega169
ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329
ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649
ATmega6490 ATmega8515 ATmega8535
Tiny Series:
ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26
ATtiny45 ATtiny85 ATtiny2313
Classic Series:
AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414
AT90S4433 AT90S4434 AT90S8515
AT90S8535
CAN Series:
AT90CAN128
PWM Series:
AT90PWM2 AT90PWM3

Package Included:
2 x USBASP Programmer Downloader
2 x Flat Ribbon Cable 10Pin
2 x Adapter Board 6Pin
2 x USB Extension Cable

Supports 3.3V and 5V microcontrollers and circuit boards, With USB power and target board support target voltage 5V, can choose by jumper cap connection.
Main Chip:ATMega8A-AU.Support AVR and ASP chip.Support AT89S51/52 microcontroller.Programming interface is reserved, you can upgrade the downloader firmware by yourself. Programming software: AVR_fighter, PROGISP1.66, PROGISP1.67, PROGISP1.68, can also compile lower or higher software, programming is very convenient.
Autospeed autofocus firmware:The downloader will automatically track the chip frequency to be programmed,automatically change the speed, to achieve automatic speed control.
Applicable to WIN 7/8/8.1/XP 32-bit/64-bit computer. It can be directly connected to the USB interface of the computer, which is very convenient to use.
Package Content:2 x USBASP Programmer Downloader, 2 x Flat Ribbon Cable 10Pin, 2 x Adapter Board 6Pin, 2 x USB Extension Cable